Toyota RAV4 2019 Owner's Manual page 78

76
2-1. Instrument cluster
sensitivity.
 "Sway Warning"
Select to enable/disable the vehicle
sway warning.
 "Sway Sensitivity"
Select to set the vehicle sway warning
sensitivity.
■
LDA (Lane Departure Alert
with steering control) (if
equipped) (P.201)
Select to set up the following items.
 "Steering Assist"
Select to enable/disable steering wheel
assistance.
 "Sensitivity"
Select to set the warning sensitivity.
 "Sway Warning"
Select to enable/disable the vehicle
sway warning.
 "Sway Sensitivity"
Select to set the vehicle sway warning
sensitivity.
■
PCS (Pre-Collision Sys-
tem) (if equipped) (P.184)
Select to set up the following items.
 PCS on/off
Select to enable/disable the pre-colli-
sion system.
 "Sensitivity"
Select to change the pre-collision warn-
ing timing.
■
BSM (Blind Spot Monitor)
(if equipped) (P.235)
Select to set up the following items.
 BSM (Blind Spot Monitor) on/off
Select to enable/disable the BSM sys-
tem.
 "Brightness"
Select to switch the brightness of the
outside rear view mirror indicators.
(P.236)
 "Sensitivity"
Select to change the alert timing for an
approaching vehicle.
■
(Toyota parking assist-
sensor) (if equipped) (P.243)
Select to set up the following items.
 Toyota parking assist-sensor
on/off
Select to enable/disable the Toyota
parking assist-sensor.
 "Volume"
Select to set the volume of the buzzer
which sounds when the Toyota parking
assist-sensor is operated.
■
RCTA (Rear Cross Traffic
Alert) (if equipped) (P.235)
 RCTA (Rear Cross Traffic Alert)
on/off
Select to enable/disable the RCTA sys-
tem.
 "Volume"
Select to change the RCTA buzzer vol-
ume.
■
RSA (Road Sign Assist)
(if equipped) (P.209)
Select to set up the following items.
 Road Sign Assist on/off
Select to enable/disable the RSA sys-
tem.