100
3-2. Opening, closing and locking the doors
A buzzer sounds and the emergency
flashers flash to indicate that all the
doors have been closed and locked.
●
If the electronic key is placed inside
the vehicle after starting a close oper-
ation via the door reserve lock func-
tion, the electronic key may become
locked inside the vehicle.
●
If the power back door does not fully
close due to the operation of the jam
protection function, etc., while the
back door is automatically closing
after a door reserve lock operation is
performed, the door reserve lock func-
tion is canceled and all the doors will
unlock.
●
Before leaving the vehicle, make sure
that all the doors are closed and
locked.
■
When reconnecting the battery
To enable the power back door to oper-
ate properly, close the back door manu-
ally.
■
If the back door opener is inopera-
tive
The back door can be unlocked from the
inside.
1
Remove the cover.
To prevent damage, cover the tip of the
screwdriver with a rag.
2
Loosen the screw.
3
Turn the cover.
4
Move the lever.
5
When installing, reverse the steps
listed.
■
Customization
Settings (e.g. power back door opening
angle) can be changed. (Customizable
features: P.415)