Type C
A
Normal fuse
B
Blown fuse
■
After a fuse is replaced
●
When installing the lid, make sure that
the tab is installed securely.
●
If the lights do not turn on even after
the fuse has been replaced, a bulb
may need replacement. (P.346)
●
If the replaced fuse blows again, have
the vehicle inspected by your Toyota
dealer.
■
If there is an overload in a circuit
The fuses are designed to blow, protect-
ing the wiring harness from damage.
WARNING
■
To prevent system breakdowns
and vehicle fire
Observe the following precautions.
Failure to do so may cause damage
to the vehicle, and possibly a fire or
injury.
●
Never use a fuse of a higher
amperage rating than that indi-
cated, or use any other object in
place of a fuse.
●
Always use a genuine Toyota fuse
or equivalent.
Never replace a fuse with a wire,
even as a temporary fix.
6-3. Do-it-yourself maintenance
●
Do not modify the fuses or fuse
boxes.
NOTICE
■
Before replacing fuses
Have the cause of electrical overload
determined and repaired by your
Toyota dealer as soon as possible.
■
To prevent damage to the engine
compartment fuse box cover
When opening the fuse box, com-
pletely release the claw locks before
lifting up the cover. Otherwise, the
claws may be damaged.
345
6