350
6-3. Do-it-yourself maintenance
unit by inserting it and turning
the bulb base clockwise.
6
Align the grooves on the light
unit with the claws, and insert
the light unit straight so that the
pin on the light unit fit into the
hole.
Confirm that the light unit is completely
secured.
7
Reinstall the screws.
8
Reinstall the cover.
■
Back-up lights
1
Open the back door and remove
the cover.
To prevent damage to the cover, protect
the tip of the screwdriver with a rag.
2
Turn the bulb base counter-
clockwise.
Remove the cord from the clip before