Toyota RAV4 2019 Owner's Manual page 170

168
4-2. Driving procedures
■
When an inspection at your Toyota
dealer is necessary
When the brake hold standby indicator
(green) does not illuminate even when
the brake hold switch is pressed with the
brake hold system operating conditions
met, the system may be malfunctioning.
Have the vehicle inspected at your
Toyota dealer.
■
If "Brake Hold Malfunction Press
Brake to Deactivate Visit Your
Dealer" or "Brake Hold Malfunction
Visit Your Dealer" is displayed on
the multi-information display
The system may be malfunctioning.
Have the vehicle inspected by your
Toyota dealer.
■
Warning messages and buzzers
Warning messages and buzzers are
used to indicate a system malfunction or
to inform the driver of the need for cau-
tion. If a warning message is shown on
the multi-information display, read the
message and follow the instructions.
■
If the brake hold operated indicator
flashes
P.373
WARNING
■
When the vehicle is on a steep
incline
When using the brake hold system on
a steep incline, exercise caution. The
brake hold function may not hold the
vehicle in such a situation.
■
When stopped on a slippery road
The system cannot stop the vehicle
when the gripping ability of the tires
has been exceeded. Do not use the
system when stopped on a slippery
road.
NOTICE
■
When parking the vehicle
The brake hold system is not
designed for use when parking the
vehicle for a long period of time. Turn-
ing the engine switch off while the
system is holding the brake may
release the brake, which would cause
the vehicle to move. When operating
the engine switch, depress the brake
pedal, shift the shift lever to P (vehi-
cles with automatic transmission or
CVT) or N (vehicles with manual
transmission) and set the parking
brake.