restraint can be removed,
remove the head restraint. Oth-
erwise, put the head restraint in
the upper most position.
(P.114)
3
Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the
seat.
The bars are installed in the clearance
between the seat cushion and seat-
back.
4
After installing the child restraint
system, rock it back and forth to
ensure that it is installed
securely. (P.50)
WARNING
■
When installing a child restraint
system
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
After securing a child restraint sys-
tem, never adjust the seat.
1-2. Child safety
●
When using the lower anchors, be
sure that there are no foreign
objects around the anchors and
that the seat belt is not caught
behind the child restraint system.
●
Follow all installation instructions
provided by the child restraint sys-
tem manufacturer.
■
Using child restraint anchorages
WARNING: child restraint anchorages
are designed to withstand only those
loads imposed by correctly fitted child
restraints. Under no circumstances
are they to be used for adult seat-
belts, harnesses, or for attaching
other items or equipment to the vehi-
cle.
Using a child restraint
anchor fitting
■
Child restraint anchor fitting
Anchor fittings are provided for
each rear seat.
Use anchor fitting when fixing the
strap.
Outboard rear seats
A
Anchor fittings
B
Upper anchorage strap
51
1