402
8-1. Specifications
Valve clearance
Drive belt tension
Fuel
Fuel type
Research Octane Number
Fuel tank capacity (Reference)
Lubrication system
Oil capacity (Drain and refill reference
■
With filter
Without filter
*
: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check
the oil level on the dipstick.
■
Engine oil selection
"Toyota Genuine Motor Oil" is used
in your Toyota vehicle. Use Toyota
approved "Toyota Genuine Motor
Oil" or equivalent to satisfy the fol-
lowing grade and viscosity.
Oil grade:
0W-16:
API grade SN "Resource-Conserv-
ing" multigrade engine oil
0W-20, 5W-20, 5W-30 and 10W-
30:
API grade SL "Energy-Conserving",
SM "Energy-Conserving" or SN
"Resource-Conserving"; or ILSAC
multigrade engine oil
15W-40:
Automatic adjustment
Automatic adjustment
Unleaded gasoline only
91 or higher
55 L (14.5 gal., 12.1 lmp.gal.)
M20A-FKS engine
4.3 L (4.5 qt., 3.8 Imp. qt.) 4.5 L (4.8 qt., 4.0 Imp. qt.)
3.9 L (4.1 qt., 3.4 Imp. qt.) 4.2 L (4.4 qt., 3.7 Imp. qt.)
API grade SL, SM or SN multigrade
engine oil
Recommended viscosity (SAE):
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
0W-16, 0W-20, 5W-20 or 5W-30
engine oil is recommended.
*
)
A25A-FKS engine