Waypoint Navigation - Raymarine E90W User Reference Handbook

2. Select the WAYPOINT AT LAT/LON softkey.
3. Select the EDIT USING KEYPAD softkey.
4. Enter the Latitude/Longitude position.
5. Select SAVE.
6. Close the window.

Waypoint navigation

Navigating to the cursor position on the chart
In the chart application:
1. Position the cursor at the desired destination on the chart.
2. Select the NAVIGATION softkey.
3. Select the GOTO CURSOR softkey.
Using waypoints, routes and tracks
Navigating to a waypoint on the screen
In the chart or radar application:
1. Place the cursor over the waypoint.
The softkeys change to show the waypoint options.
2. Select the GOTO WAYPOINT softkey.
The required course heading to the waypoint is shown on the
screen.
Note: You can select the STOP GOTO softkey at any time to
cancel the action.
Navigating to a waypoint in the Waypoints List
1. Press the WPTS/MOB button, or select the Navigation softkey
in the chart window.
2. Select the GOTO WAYPOINT OPTIONS softkey.
3. Select the required waypoint from the list.
4. Select the GOTO WAYPOINT softkey.
51