Using The Radar With The Chart; Synchronizing The Chart With Radar Range; Viewing Marpa Targets On The Chart - Raymarine C Series Reference Manual

76

4.14 Using the radar with the chart

You can enhance the use of your chart by combining it with the following radar
features:
• Radar range synchronization
• MARPA.
• Radar overlay.

Synchronizing the chart with radar range

When synchronization is switched on:
• The radar range in all radar windows, changes to match the chart scale.
• 'Sync' is indicated in the top left-hand corner of the chart window.
• If you change the radar range, in any radar window, all synchronized chart views
change scale to match.
• If you change the scale of a synchronized chart window, all radar windows change
range to match.
To set the radar range synchronization:
Radar range synchronization is not available when the chart motion mode is set
Note:
to Autorange.

Viewing MARPA targets on the chart

The Mini Automatic Radar Plotting Aid (MARPA) function is used for target tracking
and risk analysis. Although set up in radar mode or radar overlay, all MARPA targets
are displayed in the chart window and associated MARPA functions can be accessed
via the chart. For detailed information on MARPA see
To access the MARPA controls when you are in a chart application:
On screen:
With radar overlay on:
OPTIONS...
PRESENTATION...
Select the target
with cursor
Or:
RADAR
C-Series Display Reference Manual
CHART MODE AND
ORIENTATION...
TARGET
TRACKING...
RADAR SYNC
ON
page 143
.
ACQUIRE TARGET MARPA LIST...
Marpa controls displayed
MARPA
OPTIONS...