Table of Contents
Advertisement
66
Optional Equipment
9
Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free.
Discard the knock out plate.
10 Under each knock out plate, you will find a cover plate held in place with (2) ¼" screws. Use a
nut driver or drill with an extension to remove the (2) screws. Reach in and remove the cover
plate. You may discard the plates.
11 You will need to remove a third cover plate on each side. Remove the 2 screws holding the cover
plate in place. Reach in and remove the cover plate. You may discard the plates.
© Travis Industries
(for qualified installers only)
5/8/2019 - 1505
564 GSR2 25K CF
Advertisement
Table of Contents
