Table of Contents
Advertisement
Finalizing the Installation
Ember Installation
NOTE: The embers are included with the fireplace. Consult the installation manual for
details on installing the embers. If using the Ember-Glo light, the embers are
installed with the Ember-Glo light glass.
Embers are provided to further enhance the firebox. Place the embers on the firebox floor and on the
burner. Do not place embers over any of the burner holes or air channels.
Rock Wool Placement
NOTE: The rock wool is included with the fireplace. Consult the installation manual for
details on installing the rock wool.
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin layer. The best method for applying the rock wool is
to brush it on to the burner. Compress a clump of rock wool between your thumb and forefinger. Use a
stiff brush to apply a thin layer of rock wool fibers onto the burner. Do not use the entire bag of rock wool.
Use only a small amount and save the remainder. Over-use of rock wool will diminish the glow and may
cause sooting or other adverse conditions.
© Travis Industries
(for qualified installers only)
5/8/2019 - 1505
55
564 GSR2 25K CF
Advertisement
Table of Contents
