SETTING THE MINIMUM OF THE
COOKTOP BURNERS
In the minimum position the flame must have
a length of about 4 mm and must remain lit
even with a quick turn from the maximum
position to that of minimum.
The flame adjustment is done in the following
way:
•
Turn on the burner.
•
Turn the tap to the 'MINIMUM' position.
•
Take off the knob.
•
With a small flat screwdriver turn the
screw "A" to the correct regulation (fig. 6).
•
For the dual burner set the minimum (as
indicated above) for both the gas valves
(one for the inner and one for the outer
crown). The operations must be carried
out one gas valve at a time.
Normally for LPG tighten up the regulation
screw.
18
A
Fig. 6