CDA HG7501 Series Instructions For Installation, Use And Maintenance Manual page 24

Built-in cooking hob
Table of Contents

Advertisement

How To Use The Cooktop
GAS BURNERS
Gas flow to the burners is adjusted by turning
the knobs (illustrated in fig. 2) which control
the safety valves.
Turning the knob, so that the indicator line
points to the symbols printed on the panel,
achieves the following functions:
– symbol
– symbol
– symbol
The maximum opening position permits
rapid boiling of liquids, whereas the
minimum
opening
slower warming of food or maintaining
boiling conditions of liquids.
To reduce the gas flow to minimum
rotate the knob further anti-clockwise
to point the indicator towards the small
flame symbol.
Other
intermediate
adjustments
positioning
the maximum and minimum opening
positions, and never between the
maximum opening and closed positions.
N.B. When the cooktop is not being
used, set the gas knobs to their closed
positions and also close the cock valve
on the gas bottle or the main gas supply
line.
24
closed valve
maximum
opening or flow
minimum
opening or flow
position
allows
operating
can
be
achieved
the
indicator
between
Fig. 2
NOTE:
The knob and symbols may vary.
by
Caution!
Do not cover the hob with aluminium
foils.
Caution!
The cooking hob becomes very hot
during operation.
Keep children well out of reach.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg7501ss

Table of Contents