Continuing The Program With Rinse Hold; Removing The Laundry; Switching Off The Device; Child Lock - Bosch WAX32MX2 Instructions For Use And Assembly

de Parental controls
- If the temperature is high, start
the program Wash.
- If the water level is high, start the
program fling or select a suitable
program for expressing.
→ "Programs ", page 26
Remove the laundry
3.
→ Page 34 .
13.12 Continue program
with rinse hold
The program fling or select a
1.
suitable program for expressing.
→ "Programs ", page 26
on Start / reload
2.
13.13 Remove the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.14 Switch off the device
Press.
1.
Wipe the rubber sleeve dry and
2.
remove any foreign objects.
Leave the appliance door and
3.
detergent drawer open so that
Residual water can dry off.
34
1 4 parental controls
S. s ecure your device against a
accidental operation of the
controls.

14.1 Activate child lock

▶
a The display shows.
a The controls are locked. a The
parental controls also remain
to press.
14.2 Deactivate child lock
Requirement: To deactivate the child
lock, the device must be switched on.
▶
a Goes out in the display

1 5 Home Connect

D.
Connect your device to a mobile
device in order to operate functions
via the Home Connect app, adjust
basic settings or monitor the current
operating status.
Notice: You can find more information
in the digital instructions for use by
scanning
On both buttons Child lock 3 sec.
press for approx. 3 seconds.
active after switching off the device.
On both buttons Child lock 3 sec.
press for approx. 3 seconds.
In order not to abort the current
program, the program selector
must be on the initial program.
h is device is network compatible. Ver
.