Bosch WAX32MX2 Instructions For Use And Assembly page 46

Table of Contents

Advertisement

de Troubleshooting
disturbance
Program starts
not.
The door cannot be
opened.
Detergent does not work
pumped out.
46
Cause and troubleshooting
Door is not closed.
Close the door.
1.
To start the program, pressStart / reload
2.
Child lock is activated.
→ "Deactivating childproof lock ", page 34
- Done in + is activated.
Check if - Done in + is activated.
→ "Keys ", page 24
Laundry is jammed in the door.
Open the door again.
1.
Remove jammed laundry.
2.
Close the door.
3.
To start the program, pressStart / reload
4th
is activated.
Continue the program by pressing fling or
Pumping out choose and Start / reload
to press.
"Continuing the program at Rinse Hold ", page 34
Temperature is too high.
Wait until the temperature has dropped.
→ "Abort program ", page 33
The water level is too high.
Select a suitable program for expressing.
→ "Programs ", page 26
Power failure.
Open the door with the emergency release.
"Emergency release ", page 53
The drain pipe or water drainage hose is blocked.
Clean the drain pipe and water drain hose.
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and water drain hose are
not kinked or pinched.
The drain pump is blocked.
"Cleaning the drain pump ", page 40
.
.

Advertisement

Table of Contents
loading

Table of Contents