Activate Wi-Fi On The Device; Deactivating Wi-Fi On The Device; Resetting The Network Settings Of The Device; Remote Start - Bosch WAX32MX2 Instructions For Use And Assembly

Table of Contents

Advertisement

15.4 Activate Wi-Fi on the
device
Notice: The energy consumption
increases compared to the values
specified in the consumption values
table when Wi-Fi is activated.
on Remote start
1.
to press.
Set the program to position 4. a The
2.
display shows Con.
on Start / reload
3.
until the display On indicates.
a Wi-Fi is enabled.
Notice: The device does not turn off
automatically when Wi-Fi is enabled.
15.5 Deactivating Wi-Fi on the
device
on Remote start
1.
customers push.
Set the program to position 4. a The
2.
display shows Con.
on Start / reload
3.
until the display OFF indicates.
a Wi-Fi is disabled.
Notice: The connection will be
automatically re-established when the
Wi-Fi is switched on again.
15.6 Resetting the network
settings of the device
on Remote start
1.
customers push.
Set the program to position 5.
2.
a The display shows rES.
on Start / reload
3.
a The display shows YES.
on Start / reload
4th
approx. 3 seconds
to press,
at least 3 seconds
to press,
at least 3 seconds
to press.
to press.
a The network settings are
set back.
a When the display End shows are
reset the network settings.

15.7 Remote start

Enable the device for remote start via
the Home Connect app.
Activate remote start
Hints
¡ The remote start is off
Safety reasons under the
following conditions
deactivated:
-
Open the appliance door.
- Start / reload
-
Remote start
- Switch off the device.
- After a power failure.
¡ Remote start can be done for safety
cannot be activated when the
appliance door is open.
requirements
¡ The device is connected to your WLAN
Home network (WiFi) connected. ¡ The
device is connected to the Home Con-
nect app connected.
¡ A program is selected.
on Remote start
If you press the button for at least
3 seconds, you open the Home
Connect menu. If you press the
button briefly, the appliance is
enabled for remote start via the
Home Connect app.
The function is automatically
deactivated when you open the
appliance door.
shines.
a Remote start
Notice: To deactivate the function,
click Remote start
Home Connect
to press.
to press.
to press.
to press.
de
37

Advertisement

Table of Contents
loading

Table of Contents