Device With Wlan Home; Network (Wi-Fi) Without Wps; Link Function; Connect The Device To The Home Connect App - Bosch WAX32MX2 Instructions For Use And Assembly

de Home Connect

15.2 Device with WLAN home

network (Wi-Fi) without
Connect the WPS function
If your router does not have a WPS
function, you can manually connect
the device to your wireless home
network (Wi-Fi).
requirements
¡ Wi-Fi on the router is enabled. ¡ The
basic setting Wi-Fi on the
advisory is activated.
→
"Activate Wi-Fi on the device ",
page 37
¡ The device has a
Reception to the WLAN home
network (Wi-Fi).
¡ Home Connect app on the mobile
len end device is installed.
on Remote start
1.
customers push.
a The display shows Aut.
Set the program to position 2.
2.
a The display shows SAP.
on Start / reload
3.
a Flashes in the display. a The
device sets up its own
WLAN home network (Wi-Fi) with
the network name (SSID)
HomeConnect.
Call up WLAN settings in the
4th
mobile device.
Connect the mobile device to
the HomeConnect WiFi network
and enter the HomeConnect
WiFi password (key). a Your
mobile device connects
yourself with the device. The
connection process can take up to
60 seconds.
Open the Home Connect app on
5.
the mobile device and follow the
steps in the app.
36
at least 3 seconds
to press.
Enter the network name (SSID) and
6th
password (key) of your home
network in the Home Connect app.
Follow the steps in the Home
7th
Connect app to connect the device.
a When the display con shows and
lights up continuously, the device
is connected to the WLAN home
network (Wi-Fi).
When the display Err shows, the
8th.
device is not connected to the
wireless home network (Wi-Fi).
Check whether the device is
-
within range of the wireless
home network (Wi-Fi).
Reconnect the device to the
-
wireless home network (Wi-Fi)
with WPS function.
Connect the device to the Home
9.
Connect app → Page 36 .
15.3 Connect the device to the
Home Connect app
requirements
¡ The device is connected to the WLAN home
network (Wi-Fi) connected. ¡ The
Home Connect app is open
net and you have logged in.
Set the program to position 3.
1.
a The display shows APP.
on Start / reload
2.
a The device connects to the
Home Connect app.
As soon as the device is displayed
3.
in the Home Connect app, follow
the last steps in the Home
Connect app.
a When the display con shows is
the device is connected to the Home
Connect app.
to press.