Continuing The Program With Rinse Hold; Removing The Laundry; Switching Off The Device; Child Lock - Bosch WGG244M40 Instructions For Use And Assembly

Table of Contents

Advertisement

- If the temperature is high, start
the program Wash.
- If the water level is high, start the
program fling or select a suitable
program for expressing.
→ "Programs ", page 25
Remove the laundry
3.
→ Page 33 .
13.12 Continue program
with rinse hold
The program fling or select a
1.
suitable program for expressing.
→ "Programs ", page 25
on Start / reload to press.
2.
13.13 Remove the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.14 Switch off the device
Open the program selector Out put.
1.
Wipe the rubber sleeve dry and
2.
remove any foreign objects.
The appliance door and the detergent
3.
leave the drawer open so
Dry off any remaining water
can.
1 4 parental controls
S. s ecure your device against a
accidental operation of the
controls.
14.1 Activate child lock
On both buttons 3 sec. press for
approx. 3 seconds.
a The display shows
a The controls are locked. a The
parental controls also remain
active after switching off the device.
14.2 Deactivate child lock
Requirement: To deactivate the child
lock, the device must be switched on.
On both buttons 3 sec. press for
approx. 3 seconds.
a Goes out in the display

1 5 basic settings

S. o u can tailor your device to your
adjust nits.
Notice: You can find more information
in the digital instructions for use by
scanning the QR code in the table of
contents or at www.bosch-home.com.
Parental controls de
.
.
33

Advertisement

Table of Contents
loading

Table of Contents