Bosch WAX32MX2 Instructions For Use And Assembly page 51

disturbance
Spin result is
not satisfied-
lend. The laundry is
too wet / too damp.
Detergent residue
de on the damp
laundry.
Detergent residue
de on the dry
laundry.
Home Connect wireless
does not work
according to.
No connection with
the home network.
At the water inlet
hose runs water
out.
At the water outlet
hose runs water
out.
Cause and troubleshooting
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
Start the program Fling.
▶
Detergents can contain water-insoluble substances
that are deposited on the laundry.
Start the program Wash.
▶
Detergents can contain water-insoluble substances
that are deposited on the laundry.
Brush out the laundry after washing and drying.
▶
Different causes are possible.
Go to www.home-connect.com.
▶
Wi-Fi is turned off.
→
"Activate Wi-Fi on the device ", page 37
▶
Wi-Fi is activated, but the connection to the home
network cannot be established.
Make sure the home network is available.
1.
Reconnect the device to the home network.
2.
→
"Connect the device to a WLAN home network (Wi-Fi)
with WPS function ", page 35
→
"Connect the device to a WLAN home network (Wi-
Fi) without WPS function ", page 36
The water inlet hose is not correctly / firmly
connected.
Connect the water inlet hose correctly. Connect
1.
the water inlet hose
Tighten the screw connection.
2.
The water drainage hose is damaged.
Replace the damaged water drainage hose.
▶
The water drainage hose is not connected correctly.
Connect the water drainage hose correctly.
▶
Connection types water drain
Troubleshooting de
51