Table of Contents
Advertisement
13.11 Adding laundry
After the program has started, you
can remove or add the laundry
depending on the program status.
On
to press.
1.
The device pauses.
Remark:If you want to add laundry,
follow the instructions on the
display.
→ "Display", page 23
Open the door.
2.
Add or remove the laundry.
3.
Close the door.
4.
On
to press.
5.
13.12 Progr. Cancel
On
to press.
1.
Open the door.
2.
At high temperature and high
water level, the door of the
appliance remains locked for safety
reasons.
– At a high temperature, start the
programmeTo rinse.
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→ "Programs", page 27
Remove the laundry.
3.
→ "Remove laundry",
page 35
13.13 Resume program at
rinse hold
Requirements
¡The rinse hold is activated.
→ "Buttons", page 25
¡The last rinse
proposed program i
the laundry is in
of the input
s ended and
the rinse water.
The programCentrifugeor set a
1.
program for draining.
→ "Programs", page 27
On
to press.
2.
13.14 Remove laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Device in sleep mode
(standby mode)
to make
Press .
1.
Close the water tap.
2.
Wipe the rubber sleeve dry and
3.
remove any foreign objects.
Leave the appliance door and detergent
4.
drawer open so that the residual water
can dry up.
14 Child lock
Secure your device against unwanted
operation via the controls.
14.1 Switching on the child lock
▶
Approx. 3 s up 3 secondsto press.
Child lockNL
35
Advertisement
Table of Contents
