16.7
Checking the headlight setting
16.8
Adjusting the headlight range
Fuse (75011088030) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover
Finishing work
–
Mount the passenger seat. (
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertical to the wall at distance
the wall and switch on the low beam.
400726-10
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and passen-
ger if applicable.
–
Check the headlight setting.
The light-dark boundary must be exactly on the lower mark-
ing when the motorcycle is ready to be operated with the
rider mounted along with any luggage and a passenger if
applicable.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Turn adjusting screw
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
is always screwed in far enough.
A00701-10
ELECTRICAL SYSTEM 16
p. 116)
1
.
p. 63)
B
under the first marking.
5 cm (2 in)
5 m (16 ft)
p. 93)
p. 93)
1
to adjust the headlight range.
1
also secures the headlight. Ensure the screw
A
from
93