Installing The Engine Guard Retaining Bracket; Removing Front Fender - KTM 390 ADVENTURE EU 2022 Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.18
13.19
70

Installing the engine guard retaining bracket

A00691-10

Removing front fender

A00704-10
Main work
–
Position the engine guard retaining bracket, mount and tighten
1
screws .
Guideline
Screw, engine M6
guard retaining
bracket
Finishing work
–
Install the motor guard. (
–
1
Remove screws . Take off the front fender.
9 Nm (6.6 lbf ft)
Loctite ® 243™
p. 69)