Table of Contents
Advertisement
8.7
Adjusting the shift lever
Info
The adjustment range of the shift lever is limited.
–
Detach spring
–
2
Loosen nut
Tip
Press the foot brake lever downwards to make this eas-
ier.
–
Turn the push rod
brake lever.
Info
The range of adjustment is limited.
The screw must be screwed in by at least five full turns.
Screwing the push rod into the ball joint adjusts the
foot brake lever downwards.
Screwing the push rod out of the ball joint adjusts the
brake lever upwards.
–
4
Loosen nut
A
free travel
A00707-10
tion of the foot brake lever.
Guideline
Free travel at foot brake lever 3 ... 5 mm (0.12 ... 0.2 in)
–
5
Hold screw
Guideline
Nut, foot brake lever
adjustment
–
2
Tighten nut
Guideline
Nut, foot brake lever
adjustment
Tip
Press the foot brake lever downwards to make this eas-
ier.
–
Attach spring
1
.
.
3
to set the basic position of the foot
5
and turn screw
correspondingly until the
is present. If necessary, adjust the basic posi-
4
and tighten nut
.
M6
10 Nm (7.4 lbf ft)
.
M6
10 Nm (7.4 lbf ft)
1
.
ERGONOMICS 8
43
Advertisement
Table of Contents
