Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.19.7
30
Headset (optional)
F01960-01
Condition
•
The motorcycle is stationary.
•
Function KTM MY RIDE (optional) activated.
•
Function Bluetooth (optional) activated.
•
The Bluetooth
®
function should also be activated in the device
to be paired.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until KTM MY RIDE is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Pairing is highlighted. Press
the SET button to open the menu.
–
Press the UP or DOWN button until Headset is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Pairing is highlighted. Press
the SET button to open the menu.
Info
This function is only available if the vehicle has
Bluetooth
®
hardware.
–
The combination instrument starts searching for a suitable
headset. If the search was successful, the name of the head-
set is displayed in the Pairing menu. Press the SET button to
select the device. If a PIN code is required for the headset,
this must be entered now. The pairing of a headset with the
combination instrument is now completed.
Info
The headset must be in pairing mode for the headset
to be found by the combination instrument. Follow the
instructions in the headset owner's manual.
Once the pairing is completed, the name of the paired
headset is displayed in the Headset menu.
Press the UP or DOWN button until the paired device is
marked. The paired device can be deleted by pressing
the SET button.
Not every headset is suitable for pairing with the com-
bination instrument.
–
Move the previously paired device into the range of the combi-
nation instrument while the Bluetooth
The device is automatically paired with the combination
instrument.
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
–
Restart combination instrument or Pairing repeat pro-
cedure.
®
function is active.
Advertisement
Table of Contents
