Changing The Fuses Of Individual Electrical Power Consumers - KTM 390 ADVENTURE EU 2022 Owner's Manual

16 ELECTRICAL SYSTEM
16.6
92

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the passenger
seat.
A00699-10
Tip
Insert spare fuse
available if needed.
–
Mount the protection cap.
Finishing work
–
Mount the passenger seat. (
Preparatory work
–
Remove the passenger seat. (
Main work
–
1
Open fuse box cover .
–
Remove the faulty fuse.
Guideline
Fuse 1 - not assigned
Fuse 2 - 10 A - combination instrument, fuel pump
Fuse 3 - 10 A - power relay
Fuse 4 - 15 A - ignition coil, start auxiliary relay
Fuse 5 - 20 A - radiator fan
Fuse 6 - 15 A - brake light, turn signal, high beam, low
beam, position light, tail light, license plate lamp
Fuse 7 - 10 A - engine control unit, ABS control unit
Fuse 8 - 10 A - emergency OFF switch
Fuse 9 - 10 A - permanent positive for auxiliary equipment
(ACC1 front)
Fuse 10 - 15 A - ignition positive for auxiliary equipment
(ACC2 front)
Fuse SPARE - 10 A/15 A/20 A/30 A - spare fuses
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088015) (
4
in the fuse box so that it is
p. 63)
p. 63)
A
.
p. 116)
p. 116)