Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.19.15 MTC+MSR (optional)
34
Warning
Danger of accidents An incorrectly selected ABS mode
makes control of the vehicle considerably more diffi-
cult.
The ABS modes are each only suitable for certain
conditions.
–
Always select an ABS mode that is compatible with
the surface of the ground.
–
Press the SET button to select the desired ABS mode.
Info
The ABS mode can be switched during the journey.
Do not open the throttle during the selection.
When the ABS mode Road is active, ABS controls both
wheels.
When the Offroad ABS mode is active, ABS only con-
trols the front wheel. The rear wheel is not controlled by
ABS and may lock during braking maneuvers.
Condition
•
Model with MTC+MSR.
•
Cruise control system function (optional) deactivated.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until MTC+MSR is marked. Press
the SET button to open the menu.
–
Activate menu item using the UP or DOWN button.
F03330-01
–
Switch MTC+MSR on or off by pressing the SET button.
Info
Do not open the throttle when switching on or off.
Press the SET button briefly when activating the motor-
cycle traction control and the engine traction torque
control.
Hold down the SET button when switching off the
motorcycle traction control and engine traction torque
control.
When ABS mode Offroad is active, the MSR is not
active.
After the ignition is switched on, the motorcycle
traction control and engine traction torque control are
enabled again.
Press and
hold the SET
button for at
least 3 sec-
onds.
Switching off the motorcycle traction control
and the engine traction torque control.
Advertisement
Table of Contents
