Wheels, Tires; Removing The Front Wheel; Installing The Front Wheel - KTM 390 ADVENTURE EU 2022 Owner's Manual

15 WHEELS, TIRES

15.1
15.2
80

Removing the front wheel

S04157-10

Installing the front wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
S04158-10
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
–
Remove front fender. (
Main work
–
1
Remove screw and pull wheel speed sensor
hole.
–
3
Loosen screw by several rotations.
–
4
Loosen screws .
–
3
Press on screw to push the wheel spindle out of the axle
clamp.
–
3
Remove screw .
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold front wheel and remove wheel spindle. Take the front
wheel out of the fork.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Remove the spacers.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease ( p. 123)
–
Insert the spacers.
p. 61)
p. 61)
p. 70)
2
out of the
1
and contact surfaces
A