Western Digital Ultrastar Data60 Installation Manual page 39

5. Installation
Installation Guide
5.2 Cable Tray Installation (Optional)
Secure the cable tray onto the enclosure using the included M3 x 8mm T10 Torx screws and the
Step 2 :
Long T10 Torx Screwdriver. These screws should be tightened to .33-.56 Nm / 3-5 in-lbf.
Figure 15: Installing the Cable Tray
W hat to do next: T he cable tray is now installed. Proceed to
Rails Installation (page 31) .
30