Western Digital Ultrastar Data60 Installation Manual page 34

Installation Guide
From the accessory tray, open the boxes for the rails, CMA arms, and top cover alignment
Step 4 :
brackets. Remove these parts and set them aside.
Figure 11: Unpack Accessory Tray Contents
Step 5 : Open the chassis box and remove the top cushions from the front and rear of the chassis.
Figure 12: Unpack Chassis Box Contents
With assistance, and without using the system handles, remove the chassis from the chassis box
Step 6 :
and set it aside.
4.2 Ultrastar Data60 Unpacking Procedure
4. Packaging
25