Installation Guide
5.6 Cable Installation
This procedure provides instructions for installing the data and power cables for an Ultrastar Data60 .
Before you begin: Complete the instructions in
Table 30: Installation Requirements
Tool(s):
Part(s):
Person(s):
Time:
Cable the CMA(s).
Step 1 :
a. Unlatch the elbow side of the arm(s) by pressing the blue button labeled "push," and then
swing the arm(s) open.
CMA Installation (page 44)
N/A
Power cable(s) 1EX1158
Data cable(s) - quantity and type will vary by configuration
1
30 minutes
5. Installation
5.6 Cable Installation
.
47