Installation Guide
5.5 CMA Installation
This procedure provides instructions for installing the cable management assembly for an Ultrastar Data60
.
Before you begin: Complete the instructions in
Table 29: Installation Requirements
Tool(s):
Part(s):
Person(s):
Time:
Step 1 :
Install the crossbar onto the CMA mounting bracket.
a. Align the crossbar with the mounting peg facing down and pointing toward the CMA
mounting bracket.
Figure 30: Initial Alignment
b. Insert the peg on the underside of the crossbar into the slot on the CMA mounting bracket.
Figure 31: Crossbar Underside Peg
Chassis Installation (page 40)
N/A
CMA Standard Arm 1EX1174 (single) or 1EX0437 (dual)
1
10 minutes
5. Installation
5.5 CMA Installation
.
44