Western Digital Ultrastar Data60 Installation Manual page 55

Installation Guide
a. Orient the CMA so that the elbow is on the left hand side.
b. Attach all three of the connectors to the brackets on the rails. There should be one at the
elbow side and two at the other end.
Figure 34: Lower CMA Orientation
c. Slowly slide the enclosure forward to ensure the arm is operating properly, then slide it back
into the rack.
d. CMA Standard: Repeat these steps to install the upper arm with the elbow facing to the
right.
W hat to do next: T he cable management assembly is now installed. Proceed to
47) .
The CMA has two arms, labeled "upper" and "lower." The lower arm should
Note:
have the elbow on the left side and be installed first; the upper arm should have
the elbow on the right side and be installed last.
5. Installation
5.5 CMA Installation
Cable Installation (page
46