Installation Guide
g. Attach the cable retention mechanism.
For PSUs with the clip-style retention mechanism, loop the clip around the power cable and
pinch it until the clip catches and locks in place. Then slide the clip forward until it stops
near the cable connector.
Figure 37: Clip-Style Cable Retention
For PSUs with the strap-style retention mechanism, secure the power cable to the PSU
handle with the hook-and-loop strap as shown in the following image.
Figure 38: Strap-Style Cable Retention
h. Route the power cable through each basket.
i. If the installation includes more than 10 total cables, follow the recommendations in
Considerations for Cable Routing (page 54)
, before proceeding.
5. Installation
5.6 Cable Installation
Special
50