Daikin EBVZ-D9W Installer's Reference Manual page 221

ERLA11~16D + EBVZ16S18+23D
Daikin Altherma 3 R F
4P643604-1B – 2022.05
a WLAN cartridge
WLAN module
b Router
c Smartphone + app
Configuration
To configure the ONECTA app, follow the in-app instructions. While doing this, the
following actions and information are needed on the user interface:
Mode: Turn AP mode ON (= WLAN cartridge/module active as access point) or OFF.
# Code
[D.1] N/A
Reboot: Reboot the WLAN cartridge/module.
# Code
[D.2] N/A
WPS: Connect the WLAN cartridge/module to the router.
# Code
[D.3] N/A
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the ONECTA app.
Remove from cloud: Remove the WLAN cartridge/module from the cloud.
# Code
[D.4] N/A
The WLAN cartridge needs to be inserted in the
user interface. See the installation manual of the
WLAN cartridge.
The WLAN module needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
▪ Installation manual of the WLAN module
▪ Addendum book for optional equipment
Field supply.
The ONECTA app needs to be installed on the
user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Description
Enable AP mode:
▪
No
▪ Yes
Description
Reboot the gateway:
▪ Back
▪ OK
Description
WPS:
▪ No
▪
Yes
Description
Remove from cloud:
▪ No
▪ Yes
11 Configuration
|
Installer reference guide
221