Gpu Power Cable; Removing The Gpu Power Cable - Dell P114F Service Manual
Hide thumbs
Also See for P114F:
- Setup and specifications (32 pages) ,
- Quick start manual (18 pages) ,
- Connection manual (11 pages)
Table of Contents
Advertisement
Steps
1. Align and place the GPU card into its slot on the system chassis.
2. Replace the three (M2x5) screws to secure the GPU card to the system chassis.
3. Align and place the PCB beam connectors on the system board.
NOTE:
When installing an FPC beam connector, ensure that the end marked "MB" is connected to the system board
and that the alignment pins on the connector are inserted into the openings on the boards.
4. Replace the four (M2x6) screws that secure the PCB beam connectors on the system board.
5. Slide the GPU power cable connector into its slot to connect the GPU power cable to the GPU card.
6. Lock the GPU power cable connector to secure the GPU card.
Next steps
1. Install the
heat-sink for discrete
2. Install the
base
cover.
3. Follow the procedure in
GPU power cable
Removing the GPU power cable
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
heat-sink for discrete
graphics.
after working inside your
before working inside your
graphics.
computer.
computer.
Removing and installing components
47
Advertisement
Table of Contents
