Table of Contents
Advertisement
----
,.....,
----
,.......
-
SO
Begin Double-Wide Printing by
Line
SI
The SO command causes the printer to print
characters, spaces,
and backspaces double their normal width for one
line.
The
column width used by the printer is not affected by the command
.
This mode is terminated by
DC4, CR, VT, FF,
ESC
),
ESC
W,LF,
or
line
wrap.
LPRINT CHR$(1
4
)
;
Select 17-Pltch Font (Compressed Print Mode)
The SI command functions in two ways depending on the position
of setup switch 4 in Switch Group
2.
1.
When switch
4
is
off,
this command selects a 17-pitch font.
The embedded Courier 17-pitch font is selected unless a
pluggable font is being used and it contains a 17-pitch
font.
In
this
case,
the selection will be made from the pluggable font
cartridge.
2.
When switch 4 is
on,
the command is recognized by the
printer but no action is taken
.
LPRI NT CHR$
( 15)
;
DC1
Select Printer
DC2
This
command returns the
printer
to a selected state after being
deselected with the ESC
Q
(Deselect Printer) command.
LPRINT CHR$(
17
)
;
Select 10-Pltch Font
This command
functions
in two ways depending on the position of
setup switch 4 in Switch Group
2.
1.
When switch
4
is
off,
this command selects a 10-pitch
font.
The
embedded Courier
10-pitch
font is selected unless a
pluggable font is
being used
and
it
contains a 10-pitch font.
In
this case the selection
will be
made from the pluggable font
cartridge.
2.
When switch
4
is on, the command is recognized by the
printer but no action is
taken.
LPRINT CHR$
(
18
)
;
Reference
4-23
Advertisement
Table of Contents
