Table of Contents
Advertisement
Paper, Ribbon, Font Lights
4-2
Read about these lights
below;
then, if necessary, see
"
Problem
Determination
Procedures"
on page 6-1
.
Paper
The
Paper
light comes on solid when more paper is needed to print a
job but the printer senses that there is no paper. At that
time,
the
printer beeps and stops
printing,
and
the
Ready light
goes
off.
After you supply paper or correct the problem another
way,
press
Start/Stop
to resume printing.
Note:
See "Inserting Single Sheets of
Paper"
on page 2-8 if you
need help
.
If
the printer
has
a pinwheel form feeder attached, see
"Pinwheel
Form
Feeder"
on page
3-13.
If you have any other
paper
handling option installed, refer to the operator guide for that
option.
Ribbon
The
Ribbon
light comes on solid when the printer reaches the end of
the ribbon or if a ribbon-related
problem
occurs during
printing.
When the
Ribbon
light comes
on,
the printer beeps and stops
printing,
and the
Ready
light goes
off.
Once you have replaced the ribbon or corrected the problem, press
Start/Stop
to turn off the light and resume
printing.
Note: See
"
Changing
Ribbons"
on page 5-2 if you need assistance
changing the
ribbon.
,......
Advertisement
Table of Contents
