Table of Contents
Advertisement
Replacing the Ribbon
5-4
1.
Turn the ribbon take-up knob in the direction of the arrow to take
up any loose ribbon.
2.
Make
sure the ribbon release lever is in the open position.
3.
Place
the ribbon cartridge
on
the carrier assembly.
4.
Make sure the ribbon
is
threaded between the posts and is
behind
t
he
printhead.
5.
Press down on the ribbon cartridge to make sure it is securely
seated.
6.
Pull the ribbon release
lever
toward you to the closed position.
7
.
8.
Check to be sure that the
lever is fully
closed as shown
below.
Ribbon
Release
Lever
(
Closed
Position)
Close the printer cover.
Press
Start/Stop
to resume
printing.
.........
Advertisement
Table of Contents
