Table of Contents
Advertisement
3-20
16. If you unlocked the
pinwheels,
lock them in place by pushing the
blue pinwheel lock levers
downward.
Make sure the form is not
wrinkled and fits smoothly between the
pinwheels.
Pinw heel Lock Lever
17. Push the silver crossbar back down into the bottom of the slot.
Note: Humid conditions and some types of supplies
may
cause
paper feed problems when the silver crossbar is in the bottom of
the slot. If paper feeding problems
occur,
try running the job
with
the silver crossbar in the top of the slot. When printing with the
silver crossbar in the top of the
slot,
reverse line feeding should
not be used.
18.
Close the paper bail. (The feeder holds the paper bail partially
open.) Make sure the paper release lever is all the way forward
.
Paper
Bail
Lever
,......,
,........,_
Advertisement
Table of Contents
