Table of Contents
Advertisement
6-10
b.
If you are using
transparencies,
put a white backup
sheet behind the transparency and load
the
sheets.
•
To
ignore
this or other paper error
conditions,
press
Set Top of
Form;
then press
Start/Stop.
If
the paper light comes on again when paper
is in
the printer,
your
printer
requires
service.
16.
Do you have
a sheetfeed
attached?
No
-
Go to Step
17.
Yes
-
Check
for
the
following:
a.
Out of paper in drawer(s).
b.
Paper jam loading paper.
c.
Paper jam ejecting paper.
If this
did not correct the
problem,
refer to the
operating
instructions
that came with
your
sheetfeed.
To bypass this error condition, press
Set
Top
of Form.
Then, press
Start/Stop.
•
The
printer will
ignore
the error condition.
However,
unpredictable
print results may occur depending on
the sheetfeed you
have attached to the printer.
•
If
this
does not
correct
the problem, your sheetfeed
requires
service.
17.
Do
you
have a pinwheel form feeder attached?
No
-
Check the following items:
a.
Make sure the paper release lever is in the closed
position
(all
the way back).
b.
Make sure
the
printer does not have a paper
jam.
c.
Press down firmly on both
sides
of the platen to
make
sure it is securely
latched.
d.
Make sure you are using paper of acceptable quality.
Did
you find any of the above problems?
No
-
Your printer requires
service.
Yes
-
Correct the problem and try printing again.
Yes
-
Make sure the forms and
pinwheel
form feeder are
installed correctly and that the paper release lever is
pulled forward.
If
you need help with any of the above
steps concerning pinwheel form feeder
operations,
see
"
Pinwheel Form Feeder" on page
3-13.
Advertisement
Table of Contents
