Table of Contents
Advertisement
,.....,_
,-,.
........
.......
........
........
.......
Font
The Font light comes on solid when:
•
A font was selected by your software program but the font was
not
found.
•
A pluggable font was selected by your print application but not
installed in your
printer.
•
A font download was requested but there was no download
car-
tridge installed
.
•
A
pluggable font cartridge was removed from the printer while a
job was printing.
When one of the above conditions
occurs,
the printer will
beep,
the
Ready light will go off and the Font light will come
on.
Install the font
requested by your software program or change your software
program to request another (available) font. Then press Start/Stop to
continue
printing.
If the correct cartridge is not available, press
Start/Stop.
The printer
will choose a
"
best fit
"
font from the embedded
fonts.
(One that
is
closest in style and size to the one requested.)
During a download operation, if a download font was requested but a
download cartridge is not available, press Start/Stop. The printer will
discard the downloaded data.
If the cartridge needed to complete the job has been removed, the
same cartridge must be reinstalled to complete the
job; or,
the job
must be canceled and the printer reset.
Reference
4-3
Advertisement
Table of Contents
