IBM Quietwriter III 5202 Manual page 124

Cleaning the Cardholder and Ribbon Feed Rollers
Each time you replace the printhead (or when you are having print
quality problems), you should remove any accumulated dirt from the
ribbon feed rollers and cardholder.
1. Locate the ribbon feed rollers shown below.
2. Use the round end of a paper clip to loosen any accumulated dirt
or ink on the surface of the ribbon feed rollers. Use a soft cloth or
tissue to clean the ribbon feed rollers.
3. Also use the cloth or tissue to clean the silver post and the
cardholder and to clean up any loose dirt on the ribbon carrier.
Brown
Felt Pad
Changing the Brown Felt Pad
5-8
Each time you replace the printhead, you should also replace the felt
pad which is located on the ribbon carrier.
1. Locate the brown felt pad and key which came with the replace-
ment printhead.
,......._
--,.
r-,.