Table of Contents
Advertisement
..--.
,.._..,_
Pinwheel Form Feeder
An optional bi-directional pinwheel form feeder
is
available for your
printer.
Note:
To obtain ordering
information
for this pinwheel form feeder
and for other available paper
handlers,
contact your point of
purchase.
This pinwheel form feeder can use
forms
with an overall width
of 76.2
to 381 mm (3 to 15 in) edge to edge, and with a pin-to-pin width of 63.5
to 368.3 mm (2.5 to 14.5 in).
Avoid
printing on the perforations of the
form
paper because the
printer may falsely report a ribbon problem and the printed forms
may be difficult to read.
Installing the Form Feeder
1.
Locate the form feeder attachment.
2.
If the
Ready
light is on, press
Start/Stop.
The
carrier
moves
to
the
center.
Operating the Printer
3-13
Advertisement
Table of Contents
