Power Requirements - Jacuzzi J-435 Owner's Manual

7.0

Power Requirements

Jacuzzi ® spas are designed to provide optimum performance and
flexibility of use when connected to their maximum electrical service.
They are configured at the factory. The most common electrical
connections are listed below:
Voltage:
Max. Current Draw:
Wattage:
Frequency:
Number of Wires:
Single breaker configuration is the factory default.
In this configuration, the heater will not operate while any jets pump is
*
running. The service 1 breaker will include connection for all components.
In this configuration, the heater will operate while one or two jets
**
pumps are running. The service 1 breaker will include connection for all
components.
Export 50 Hz (Two and Three Breaker Connections)
Voltage:
Max. Current Draw:
Wattage:
Frequency:
Number of Wires:
*** In this configuration, the heater will operate while one or two jets
pumps are running. The service 1 breaker will include connections
for the heater and transformer. The service 2 breaker is for all other
components.
**** In this configuration, the heater will operate while all jets pumps are
running. The service 1 breaker will include connections for the heater
and transformer. Service 2 breaker is for pump 1 and other compo-
nents. Service 3 breaker is for pump 2.
Export 50 Hz (1 Breaker Connection)
Single Breaker
Service 1
(including Heater)*
Dual Service Breakers
Service 1/Service 2
Breaker***
230 VAC
12A/17A
2,8kW/3,9kW
230 VAC
17A
3,9kW
50 Hz
3
50 Hz
5
J-445/J-435 Export
Single Breaker
Service 1
(including Heater)**
230 VAC
29A
6,7kW
50 Hz
3
Three Service Breakers
Service 1 /Service 2/
Service 3 Breaker****
230 VAC
12A/10A/7A
2,8kW/2,3kW/1,6kW
50 Hz
5
17