Power Requirements - Jacuzzi J-230 Owner's Manual

J-200 Series

6.0 Power Requirements

Jacuzzi® spas are designed to provide optimum performance and flexibility
of use when connected to the maximum electrical service listed below. Minor
circuit board modifications can be performed to allow your new spa to accept an
electrical service other than the factory operation setting. Note: Refer to pages
- for circuit board configuration details or contact your authorized Jacuzzi
38 41
dealer.
All North American J-270 & J-280 Models (60Hz)
Circuit Breaker (2-Pole):
Number of Wires:
Frequency:
Current Draw:
In 40A configuration, the heater will not operate while either jets pump
*
is running in high speed. Note: pump 2 runs only in high speed.
** In 50A configuration, the heater will not operate while both jets pumps
are running in high speed. This is the factory setting. Note: pump 2 runs
only in high speed.
*** In 60A configuration the heater will operate while both jets pumps are
running in high speed.
Circuit Breaker (2-Pole):
Number of Wires:
Frequency:
Current Draw:
In 40A configuration, the heater will not operate while either jets pump
*
is running in high speed. Note: pump 2 runs only in high speed.
** In 50A configuration, the heater will not operate while both jets pumps
are running in high speed. This is the factory setting. Note: pump 2 runs
only in high speed.
10
240V/40A*
40A*
60Hz
26A
All North America J-230 Models (60Hz)
240V/50A**
50A**
3 3
60Hz
36A
240V/40A*
40A*
3
60Hz
26A
240V/60A***
60A***
3
60Hz
45A
240V/50A**
50A**
3
60Hz
36A