Operating Instructions; Protouch™ Control Panel; Activating The Jets Pumps; Lights Menu - Jacuzzi J-435 Owner's Manual

11.0 Operating Instructions

11.1 ProTouch™ Control Panel
Your Jacuzzi spa is equipped with a ProTouch control panel; massage
selectors, and air control knobs (page 22). These controls let you
operate many of the special functions of your Jacuzzi spa.
11.2

Activating the Jets Pumps

From the Home Menu, (Figure 11.2a), tap
Submenu. The panel will display the Jets Pump Submenu (Figure 11.2b).
Note: Once you enter the Jets Pump Submenu, all the pumps will
activate. You can turn off the jets pump by tapping the jets pump button.
100
Figure 11.2a
= Jets Pump 1 Button
1
= Jets Pump 2 Button
2
= Back Button: Tap to go back to the previous menu.
= Invert Button: Tap to invert the display image.
1. Tap the Jets 1 button to turn the pump on and off.
2. Tap the Jets 2 button to turn the pump on and off.
3. When a jets pump is on, the button will have a blue
inner glow.
Note: Auto Turn Off — Anytime a pump has been
manually turned on, it will automatically turn off after approximately 20
minutes. If at this time you desire more jet operation you may simply turn
the pump(s) back on.
11.3

Lights Menu

From the Home Menu, (Figure 11.3a), tap
The LCD screen will display the Light Submenu (Figure 11.3b). From this
menu you can control the hot tub lighting. When you tap
submenu, the lights will turn on, if not on already, in a color blending mode.
Default settings are brightness level at 0 and speed setting of 0.
Note: The lights automatically turn off after 2 hours. They can be
reactivated if needed.
6:45p
J-445/J-435 Export
to enter the Jets Pump
JETS
1 2
Figure 11.2b
1
1
to enter the Light submenus.
to enter the
JETS ICON
WHEN ON
JETS ICON
WHEN OFF
31