General safety instructions
•
Make sure that the CR 30-X is constantly monitored in order to avoid
inappropriate handling, especially by children.
•
Only trained service personnel must make repairs. Only authorized service
personnel must make changes to the CR 30-X.
•
If there is any visible damage to the machine casing, do not start nor use
the CR 30-X.
•
Do not override or disconnect the integrated safety features.
•
Do not apply excessive shock or vibration to the CR 30-X during operation
(e.g. putting cassettes on top of the device). This may decrease the image
quality. Neither should the device be moved during operation.
•
Switch off the CR 30-X before performing any maintenance work or
repairs. Disconnect the CR 30-X from the mains before making repairs or
performing any maintenance activities during which live electrical
components may be exposed.
•
As is the case for all technical devices, the CR 30-X must be operated, cared
for and serviced correctly. A regular quality control is recommended. This
can be done according to local standards or by using the Agfa Auto QC tool.
•
If you don't operate the CR 30-X correctly or if you don't have it serviced
correctly, Agfa is not liable for resulting disturbances, damages or injuries.
2386B EN 20060926
CR 30-X
25
Introduction