AGFA CR 30-X User Manual page 120

October 2006
Easy labeling
With our CR MD4.0T General Cassette, no special pen is
necessary for marking the cassette label. When using a non-
permanent marker, only a cloth is necessary to erase the
label. Marks made by a permanent marker can be easily
removed by a cloth dampened with alcohol or CR screen
cleaner. In either case, the cassette is ready for new labeling
quickly and without effort.
technical
s pEC if i CaTio Ns
MaTERial
• Body: ABS (Acrylonitryl butadiene styrene)
• Corners: TPE
• Shutter: PP (Polypropylene)
• Inner lining: felt
sizEs
• 35 x 43 cm (14 x 17")
• 24 x 30 cm
• 18 x 24 cm
• 15 x 30 cm dental cassette
iDENTifiCaTioN
• Embedded memory chip on tray
• Contactless RF identification
agfa and the agfa rhombus are trademarks of agfa-gevaert N.V., Belgium or its affiliates. all other
trademarks are held by their respective owners and are used in an editorial fashion with no intention
of infringement. the data in this publication are for illustration purposes only and do not necessarily
represent standards or specifications which must be met by agfa. all information contained herein is
intended for guidance purposes only, and characteRiStics of the products described in this publication
can be changed at any time without notice. products may not be available for your local area. please
contact your local sales representative for availability information. agfa diligently strives to provide
as accurate information as possible, but shall not be responsible for any typographical error. agfa-
gevaert N.V. has been awarded the iSO 9001 certificate by Lloyd's Register Quality assurance. the
business group healthCare has been awarded the iSO 13485 certificate for design, development and
production of imaging and communication solutions for healthcare applications.
CR md4.0t general Cassette
antistatic inner lining
The inner lining of the CR MD4.0T General Cassette body is
made of felt. This ensures a high degree of protection against
electrostatic charging, dust collection and mechanical
damage on the CR imaging plates.
a unique service
CR MD4.0T General Cassettes and imaging plates can
be ordered as pre-staged sets. The CR MD4.0T General
Cassettes are in this case loaded with the corresponding
cassette trays with imaging plates and initialized in
the factory. Using this unique service results in savings in
installation and start-up time on site.
CoNfiGURaTioN REqUiREMENTs
• CR 30-X digitizer
• CR MD4.0 General Plate
WEiGhT (CassETTE + TRay + iMaGiNG plaTE)
• 35 x 43 cm: 1.9 kg
• 24 x 30 cm: 1.0 kg
• 18 x 24 cm: 0.6 kg
• 15 x 30 cm: 0.7 kg
sTaNDaRDs
• ISO 4090
© Copyright 2006 agfa-gevaert N.V.
all rights reserved
printed in Belgium
published by agfa-gevaert N.V.,
B-2640 mortsel-Belgium
NgKZ3 gB 00200610