AGFA CR 30-X User Manual page 16

CR 30-X S
YSTEM
At the NX Station:
1
Click ID in the examination window of NX.
In the Examination window, select the thumbnail in the Image overview pane and
click on ID to send the data to the digitizer.
2
As soon as the CR 30-X digitizer has received the complete identification data
from the NX Station (via FireWire) it will start digitizing the image plate.
The CR 30-X converts the information of the latent image to digital data.
3
After digitizing, the CR 30-X digitizer:
•
Transmits the digital image data to the image processing station ('destination').
•
Erases the image plate and re-inserts it into the cassette.
•
Gives the cassette ID data the status 'erased'.
•
Unlocks the cassette.
16
Getting Started with the CR 30-X System 2385A EN 20060630