AGFA CR 30-X User Manual page 45

Safety Instructions for Laser Products
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
LASERKLASSE 1
The CR 30-X is a Class 1 Laser Product. It uses one laser diode of a 80 mW
type, classification class IIIb.
Under normal operating conditions - device with all covers - there can be no
laser radiation outside the CR 30-X.
The technical concept does not allow the user to remove the top cover. The
concept provides maximum reliability that no image plate jam can occur in
the post scan area.
However, the user is allowed to open the front cover, e.g. to solve cassette or
image plate jams at the front side. When opening the front panel, all motor
driven system movements will be stopped (including the laser).
WARNING:
manual can be hazardous with regard to laser radiation.
2386B EN 20060926
CAUTION!
CLASS 3B LASER RADIATION:
WHEN OPEN AVOID DIRECT
EXPOSURE TO THE BEAM!
VORSICHT !
LASERSTRAHLUNG KLASSE 3B:
WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHL AUSSETZEN!
User interventions other than those described in this
CUIDADO!
RAYO LASER CLASE 3B:
EVITAR LA EXPOSICIÓN AL HAZ
CUANDO LA TAPA ESTÁ ABIERTA.
ATTENTION!
FAISCEAU LASER CLASSE 3B:
QUAND CAPOT OUVERT ÉVITER
DE S´EXPOSER AU RAYÓN!
Introduction
CR 30-X
19